Functions of drawing points, lines, surfaces, circle, consecutive interpolation of irregular curves and three-axis linkage enables to pot any irregular workpieces
|Mixing Ratio||100: 100～100: 20 or 100: 20～100: 10 adjustable|
|Operation system||Windows XP|
|Measuring mode||Servo motor+ micro amount piston pump|
|Drive Mode||servo motor & ball screw|
|Power supply||AC220V 50HZ 3.0KW|
|Work environment||Humidity: 20-90%, Temperature: 0-40℃|
|X/Y/Z axis motor||kit||2||Servo motor and driver|
|Material stirring system||kit||2||Optional|
|Double liquid mixing valve||kit||1||Static or dynamic valve as optional|
|High precision metering pump||kit||2||Gear pump/rotary plunger pump as optional/piston pump|
|Semi-automatic cleaning device||kit||1||Optional|
|Measuring motor||kit||2||Servo motor|
|Barrel||kit||2||30L/15L or 70L, function of vacuum deaeration and heating is selectable.|
|Conveying pipe||kit||2||Teflon hose|
|Automatic potting software||kit||1||Second independent R&D|
|Detecting for dynamic stir default||kit||1||Optional|
|Discharging pressure detector||kit||1||Optional|
1. Operating interface of windows XP which is easy to learn;
2. Functions of drawing points, lines, surfaces, circle, consecutive interpolation of irregular curves and three-axis linkage enables to pot any irregular workpieces;
3. Hard disk has super memory capacity, and software has functions of regional array, translation,rotation and computation, etc;
4. The size of glue, speed of glue spread, dispensing time, time of halting dispensing can be set by parameters. With this method, glue outflow is quite stable without leaking and dripping;
5. Optional CCD visual programming system enables easy and quick programming.
6. Fully automatic operation with integration of metering, potting, encapsulation function.
7. Mixing on demand and potting at the same time to save glue.
8. Dual barrels to store A, B glue separately, which prevents gel in a long time.
9. Optional dynamic or static mixing mode ensure fully mixing, and mixing ratio can be regulated from100: 100 to 100:20 or from100: 20 to 100: 10;
10. Unique control system without impaction from air pressure, which avoids the phenomenon of nonuniformity, drawing and bubble in the potting process.
11. Height-adjusting device of Z-axis enables to work fo workpieces of different height;
12. Automatic alarming by up /low level materials sensors to avoid short of material.
13. Optional functions of stirring, heating and deaeration, fit for various potting /dispensing process.
14. Adapt micro amount piston pump for precise measurement, good performance of glue suction, can pump various medium and glue with different viscosity, the material tank rack and piston pump installation position is higher, shorten the glue conveyor pipe, decrease the inside pressure and improve the glue dispensing precision.