Language
Home >> DISPENSERS >> -2 components dispensing, potting dispensers
SEC-400ZL CE Certificated high accuracy inline vaccum two componnet full automatic potting machine " frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen>

SEC-400ZL CE Certificated high accuracy inline vaccum two componnet full automatic potting machine

Functions of drawing points, lines, surfaces, circle, consecutive complement of irregular curves and three-axis linkage available, applicable to any irregular product potting.

Share:
Product Description

5fab571d68a4d.jpg

ModelSEC-400ZL/ZHL
Work Area400(X)╳300(Y)╳100(Z)mm
Travel speed500mm/sec
Mixing precision±2%
Potting precision±2%
Mixing ratio100: 100~100: 20 or 100: 20~100: 10 adjustable
Potting speed1g/sec~15g/sec or 5g/sec~30g/sec
Max negative pressure-0.01MP
Operable viscosity<100000PCS
Operation systemWindows/XP
Measuring modeStepping motor+ gear pump/rotary piston pump/servo motor+piston pump
Cleaning modeautomatic
Drive ModeServo motor/ball screw
Power supplyAC380V 50HZ 7.0KW
(Size)2350(L) ╳2150(W)╳2200(H)mm
WeightAbout 800KG
Work ConditionHumidity: 20-90%, Temperature:0-40℃


Configurations:

TitleUnitQTYRemarks
Motorkit3Panasonic servo motor
Lead screw and guide railkit3Taiwan
CCD visual systemkit1industrial CCD
Industrial Computerkit1Advantech
Monitorkit1Dell
Vacuum pumpkit1BECKER
Conveying systemkit1Second
Motion controllerkit1Second independent R&D
Automatic potting softwarekit1Second independent R&D
Glue storage tankkit215L/30L/70L stainless steel glue storage tank, with glue short alarming function
Dispensing valvekit1Second independent R&D
Detecting for dynamic stir defaultkit1Optional
Discharging pressure detectorkit1Optional
Semi-automatic cleaning devicekit1Optional
Material stirring systemkit/Optional


Features:

1.WINDOWS/XP Operating interface, easy to learn and understand.

2.Functions of drawing points, lines, surfaces, circle, consecutive complement of irregular curves and three-axis linkage available, applicable to any irregular product potting.

3.Hard disk has super memory capacity for storage of program, and software has functions of regional array, translation, rotation and computation, etc.

4.Potting volume, speed, time, and halting time can be set by parameters; glue outflow is quite stable with no leaking or dripping.

5.CCD visual programming optional, realizing fast programming process.

6.Automatic overhead door, automatic sealing device, decreasing labor operation while increasing efficiency.

7. Speed chain conveying system, open to conveyor integration operation.

8. Equipped with BECKER vacuum pump with suction flow rate as 165m3/h.

9. Parameters on the vacuum gauge adjustable, the pump automatically stops working when vacuum degree reaches the limit.

10. Equipped with safety light curtain, make sure the equipment safely work.

11. Full automatic process of glue mixing, potting, and various route potting.

12. Glue mixed as needed before and in the process of potting, saving glue as much as possible.

13. Dual glue tanks to store A and B glue separately, helping to store glue for a long time.

14. Mixing ratio adjustable from 100: 100 to 100: 20 or from100:20 to 100:10, dynamic or static mixing mode optional to ensure fully mixing.

15. Unique control system helps to avoid uneven potting, drawing and bubble in the potting process without impaction from air pressure.

16. Height-adjusting device of Z-axis enables to work for workpiece of different height.

17. Automatic alarming by up /low level materials sensors to avoid short of material.

18. Optional functions of stirring, heating and vacuum defoamation, fit for various potting /dispensing process.