Touch window interface, easy to learn and operate; 100 program parameters can be stored, no need to re-program for the same potting process.
|Mixing Ratio||100: 100～100：20 or 100: 20～100: 10 adjustable|
|Potting speed||1g/sec～15g/sec 5g/sec～30g/sec|
|Operation system||Second motion controller|
|Measuring mode||Stepping motor/gear pump/ rotary plunger pump servo motor+piston pump|
|Drive Mode||Micro stepping motor& sync belt (servo motor & balls crew)|
|Power supply||AC220V 50HZ 2.5KW|
|Work environment||Humidity: 20-90%, Temperature: 0-40℃|
1.Touch window interface, easy to learn and operate; 100 program parameters can be stored, no need to re-program for the same potting process.
2.Potting volume, speed, time, and halting time can be set by parameters; glue outflow is quite stable with no leaking or dripping.
3.Saving labor cost while realizing capacity as high as human worker.
4.Glue mixed as needed before and in the process of potting, saving glue as much as possible.
5.Dual glue tanks to store A and B glue separately, helping to store glue for a long time.
6.Mixing ratio adjustable from 100:100 to 100: 20 or from 100:20 to 100: 10, dynamic or static mixing mode optional to ensure fully mixing.
7.Unique control system helps to avoid uneven potting, drawing and bubble in the potting process without impaction from air pressure.
8.Automatic alarming by up /low level materials sensors to avoid short of material.
Optional functions of stirring, heating and vacuum defoamation, fit for various potting /dispensing process.