Home >> DISPENSERS >> -2 components dispensing, potting dispensers
Two-Component Potting Machine " frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen>

SEC-3030C Two components automatic potting machine


1. Operating interface of windows XP which is easy to learn;

2. Functions of drawing points, lines, surfaces, circle, consecutive interpolation of irregular curves and three-axis linkage enables to pot any irregular workpieces;

3. Hard disk has super memory capacity, and software has functions of regional array,translation,rotation and computation, etc;

4. The size of glue, speed of glue spread, dispensing time, time of halting dispensing can be set by parameters. With this method, glue outflow is quite stable without leaking and dripping;

      5. Optional CCD visual programming system enables easy and quick programming.

      6. Fully automatic operation with integration of metering, potting, encapsulation function.

7. Mixing on demand and potting at the same time to save glue.

8. Dual barrels to store A,B glue separately, which prevents gel in a long time.

      9. Optional dynamic or static mixing mode ensure fully mixing, and mixing ratio can be regulated from100:100 to 100:20 or from 100:20 to 100:10 ;

     10. Unique control system without impaction from air pressure, which avoids the phenomenon of nonuniformity, drawing and bubble in the potting process.

     11. Height-adjusting device of  Z-axis enables to work for workpieces of different height

     12. Automatic alarming by up /low level materials sensors to avoid short of material.

      13. Optional functions of stirring, heating and deaeration,fit for various potting /dispensing process.

Product Description






Work Area



Travel speed



Mixing precision


potting precision


Mixing Ratio

10010010020 or 100:20100:10 adjustable

 Potting speed

1g/sec15g/sec or 5g/sec30g/sec

 Operable viscosity


Operation system

Second motion controller   system

 Measuring mode

Stepping motor/gear   pump/ rotary plunger pump servo motor+piston pump

Drive Mode

servo motor & ball   screw

Micro stepping   motor& sync belt

Power supply

AC220V  50HZ    2.5KW




1300(L) 1250(W)1600(H)mm


About 330kg

About 330kg

 Work environment

Humidity20-90%  Temperature0-40℃