Language
Home >> News

Why does the Dispenser not Reset?

May. 16, 2020

As a 2 Components Automatic Potting Machine Wholesale, share with you. When operating the automatic dispenser, the staff often encounters that the machine cannot be reset, but does not know how to perform maintenance, so it is distressed. When the system is turned on, it will automatically restore to the set state for subsequent follow-up operating. But sometimes when the machine system is turned on, the system is not reset, which means that there is a problem with this system and needs to be repaired. Many people are distressed because of this and do not know how to repair it. Let me introduce how to repair the machine without resetting:

2 Components Automatic Potting Machine

2 Components Automatic Potting Machine

First, check whether the emergency stop button of the system has been pressed. After the button is pressed, you need to check the configuration file. It is recommended to perform a re-upgrade and check whether the compiler used is the correct version to prevent the compiler from mismatching the configuration file. Checking the hardware connection, when there is a problem with the driver, switch or jumper, it may also cause the boot to not reset. The daily maintenance of the dispenser will directly affect the service life of the dispenser. The daily work of the dispenser maintenance has a great influence on the service life of the dispenser, including the smoothness of the normal use process.

How to maintain the dispenser? First, change the rubber type, you need to clean the pipeline. At this time, first close the feed valve, open the discharge valve, and discharge the remaining rubber in the rubber bucket, close the discharge valve and open the feed valve, pour the cleaning solvent into the rubber storage bucket, start the machine body, press the solvent Out rinse. Before the glue dispenser is used in large quantities, please try it in small quantities and master the useful skills of the product to avoid errors. When the test is ok, then use the double drop glue machine or double liquid glue filling machine for mass production; pump The vacuum system performs vacuum defoaming treatment on the glue to eliminate the bubbles generated during the stirring process, or let it stand for 10-20 minutes before use, so that the bubbles generated during mixing can be eliminated in time, and the more glue mixed together. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so it is necessary to mix the glue according to the actual production situation, otherwise it will cause a waste of glue. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry. Unplug the power supply when the machine is not used for a long time, which not only can prolong the life of the machine but also save a lot of electricity costs.

Our company also has 2 Components Automatic Potting Machine for sale, please contact us.


Share: